Pedal to the metal.

The CSL Pedals are solidly built from steel. Precise and durable sensors allow you to stay in control with smooth throttle and brake inputs.

Heavy steel construction.

The stability of the all-metal design means it is built to last. The stiffer spring on the brake pedal combined with the PU foam damper provides a realistic, progressive feeling.

Magnetic sensors.

Both the throttle and brake axes use precision Hall-effect sensors. By measuring pedal position with magnets, the system is contactless, meaning no wear on the sensor and consistent performance.

Three ways to upgrade.

Upgrade your CSL Pedals with metal pedal faces (optional), the Clutch Kit (optional), or the Load Cell Kit (all kits sold separately). The Clutch Kit provides a third pedal at the lowest possible price. The Load Cell Kit is an alternative to the Clutch Kit, also providing a third pedal, while upgrading the brake and main electronics.

Clutch Kit or Load Cell Kit.

The CSL Pedals Clutch Kit (sold separately) adds a dedicated clutch pedal, with a stiffer spring than the throttle and the same wider pedal face as the brake. The CSL Pedals Load Cell Kit (sold separately) is the ultimate upgrade for realistic braking feel. When upgrading to the Load Cell Kit, the standard brake pedal can be used as the clutch.

Metal pedal faces.

Transform the appearance of the CSL Pedals with durable, anodised aluminium pedal faces (sold separately). The throttle pedal face is extended, allowing for a comfortable heel-and-toe technique.

Get started instantly.

CSL Pedals couldn’t be easier to set up. The simple design means they’re easy to clean and maintain too.

Plug and Play.

CSL Pedals connect directly to any supported FANATEC® Wheel Base via the included RJ12 cable. Alternatively, they can be used as a standalone USB device with the ClubSport USB Adapter (available separately), or with the CSL Pedals Load Cell Kit (sold separately).

Adjustable.

Find a comfortable driving position with customisable horizontal pedal spacing and pedal plate height adjustment. The pedals can be hard-mounted, or you can easily brace them against a wall or hard surface thanks to the vertical plates at the rear.

Compatibility

Peripherals

Compatible with:

All CSL Elite Wheel Bases
CSL DD Wheel Base
All ClubSport Wheel Bases
All Podium Wheel Bases
ClubSport USB Adapter
CSL Pedals Clutch Kit
CSL Pedals Load Cell Kit
A wheel base firmware update may be necessary to ensure best performance. Firmware from Fanatec Driver 402 or higher is recommended. To ensure compatibility with the ClubSport USB Adapter, please use this driver.

Platforms

PC: The CSL Pedals package does not come with a USB connector and must be connected directly to a compatible Fanatec Wheel Base. To operate as a standalone input device, use the ClubSport USB Adapter (available separately) or the CSL Pedals Load Cell Kit (sold separately). The Load Cell Kit adds a USB connector.
Consoles: This pedal set can be used on gaming consoles, if connected through a Fanatec Wheel Base / Racing Wheel. Check the Fanatec product page for relevant information on how the pedals connect to your console. It will not work on consoles if connected with the ClubSport USB Adapter.

What's included

Throttle pedal unit
Brake pedal unit with PU foam damper
Heel rest
1x Wheel Base connection cable RJ12/RJ12 (~2m)
1x Torx key
M4x12 mounting bolts (only to mount pedals to heel rest)
Hard-mounting spacers
Replacement rubber feet (floor protection)
1x Quick Guide